Download Manual: Oximus T410 Manual
Oximus T410 Tilt Wall Mount is fit most 32″ – 55″ Flat Panel LED, LCD TV and load-bearing up to 35kgs/77lbs. Suited for VESA hole up to 400×400 and 0° to 12° tilt functions.
This low profile design made your ultra-thin flat panel TV much closer to the wall, only 35mm (1.4”) distance
from the wall. The power coating finish guarantees the durability and the simple construction is easy to install. With spirit level for level installation, so installation errors can be avoided.
Best for TVs that need to be mounted above eye level, the tilt functionality allows you to adjust the screen angle to eliminate glare and to provide a better viewing angle.
Hardware Kit included
Wall Plate(x1), Mount Plate(x2), M4x35mm Bolt(x4), M5x35mm Bolt(x4), M6x35mm Bolt(x4), M8x35mm Bolt(x4), M6x50mm Screw(x4), Fischer(x4), Spacer(x4), Ring(x4)
* Vesa Size
The VESA Interface Standard defines the distance in millimeters between the four mounting holes on
the back of a TV (distance horizontally x distance vertically).
VESA is a standard used for Monitor and TV wall mounts and wall mounting systems, adapted by most Monitor and TV brands.
Common VESA sizes are 100 x 100 – 400 x 400 depending on the screen size of your TV.
**Where can I find my VESA size?
You can refer to the specifications in the product manual but perhaps the fastest and easiest way to
find out the VESA size of your TV is just by measuring it. Locate the four holes in the back of your television,
you just need to measure these from left to right and top to bottom.
By now you should know the horizontal and vertical distance, between the holes and therefore the VESA size of your Monitor or TV.
***How do I determine which bracket is suitable for my monitor or TV?
To determine a bracket whether it is suitable for your monitor or TV is to make sure the vesa used by the monitor or TV
and also the weight of your monitor or TV. Do not based on your monitor or TV inch.
Buy at:
 |
|
|
 |
| ABDITAMA OFFICIAL | OXIMUS OFFICIAL | OXIHOM | OXIHOM |
